Erail Corded - L-Shape Wipe

TRA2701 Cord / Handline, 8 Plait, 8 mm diameter prestretched matt black polyester cord used to operate all Triple E track systems, manual and motorised. Triple E rope has a red fleck in it and is the only rope we guarantee to work with our systems and rearfold components.

TRA1102 is a floor mounted return pulley designed for use on fixed position track systems. It is intended to be screwed to the floor where the cord is tensioned by adjusting the height of the pulley with thumb screws. The overall dimensions of the Adjustable Floor Pulley are 300 m high x 90 mm wide x 75 mm at base.

ERL0103 Black anodised Erail curved track with a 0.50 m radius (1'7") by 90 degree bend to form a right angled track section.

Black anodised Erail curved track with a 0.75 m radius (2'5") by 90 degree right angle bend. M8 Erail  and 2Way channel nuts can be inserted anywhere along the continuous top channel for the attachment of suspension fittings. Separate track sections can be joined using our ERL0501 joint sets and the lower section of the track features a keyhole slot for a roll pin which can conveniently be used for aligning the running surfaces.

ERL0105 Black anodised Erail curved track with a 1.00 m radius (3'3") by 90 degree right angle bend to form a right angled track section.

12 wheel master runner for curved Erail systems.

ERL0601 Erail carrier is constructed from a Steel 'U' bracket to which two rubber buffers are fitted. Ball raced wheels ensure a silent operation and the curtains can be attached using a swivel hook located in the base of the runner. Each runner has a SWL of 15 kg.

ERL1902 Curve cord guide bolts directly onto the top of the Erail track via an M8 bolt and Tee channel nut. It guides the operating cord for curved tracks around the top of the track system.