Tel: +44 (0) 1959 570 333 Email: info@triplee.ltd

UniTrackā„¢ - Heavy Duty Curtain and Scenery Track

The original Triple E tracking. Strong and dependable, this is the track for tours and future flexibility. UniTrack™'s modular nature means it can change size, shape and purpose quickly and easily. A favourite of all crews, it sets the standard.

UniTrack™ was Triple E’s first track system, created in direct response to industry needs. A fabricated steel construction UniTrack™ has been designed to withstand life on the road and is a staple in tour kits around the world. UniTrack™’s simple bolt and spigot joint is incredibly quick to assemble reducing the fit-up time required. Featuring ball-raced runners with polyurethane wheels and nylon pulleys UniTrack™ provides smooth, silent operation.

UniTrack™ can be used for drapes and scenery with no height restrictions. See our Working Load Limit table in the Download Area or Get a Quote to check which carriers and suspension your project requires. Featuring both rearfold and frontfold accessories drapes can travel on- and off-stage flat to ensure a painted cloth is always visible.

Key Points

  • Modular lengths – 0.25 m, 0.50 m, 1.0 m, 2.0 m

  • Quick and easy joint system

  • 51 x 100 mm (WxH)

  • Walkalong, corded or motorised

  • 17 standard cording methods

 

Get a Quote

Walkalong Corded

Documents

There are a number of diagrams available for this system, showing possible layouts and product dimensions.

UniTrack Documents


Product list for UniTrack

The 66 products listed below may be used in the UniTrack system.

8 mm BLACK POLYESTER CORD PER METRE

8 mm BLACK POLYESTER CORD PER METRE

TRA27 Cord / Handline, 8 Plait, 8mm diameter prestretched matt black polyester cord used to operate all Triple E track systems, manual and motorised. Triple E rope has a red fleck in it and is the only rope we guarantee to work with our systems and rearfold components.

ADJUSTABLE FLOOR PULLEY

ADJUSTABLE FLOOR PULLEY

TRA12 is a floor mounted return pulley designed for use on fixed position track systems. It is intended to be screwed to the floor where the cord is tensioned by adjusting the height of the pulley with thumb screws. The overall dimensions of the Adjustable Floor Pulley are 300m high x 90mm wide x 75mm at base.

FOOT STIRRUP

FOOT STIRRUP

TRA11 Foot stirrup  is a floor level mounted pulley designed for use on a flown or movable corded track system. The stirrup at the base allows the rope to be tensioned either by placing a foot into it or hanging a weight from it. The overall dimensions of the Pulley are 300mm high x 150mm wide at the base with a 25mm wide strap.

FRONTFOLD BRUSH ASSEMBLY (ONE REQUIRED PER CURTAIN)

FRONTFOLD BRUSH ASSEMBLY (ONE REQUIRED PER CURTAIN)

TRA08F The Frontfold brush assembly is used on Unitrack and Unibeam straight track systems in conjunction with TRA06R rearfold carriers. The assembly is mounted at the start of the curtain stack and releases the curtain one carrier at a time so that the curtain or cloth travels on stage flat. The rearfold carriers ensure the curtain travels off stage flat. See our cording diagrams for mounting and use details.

GIRDER CLAMP

GIRDER CLAMP

TRA13 This girder clamp provides a suspension point from the flanges of an 'I' beam. It comprises of a length of Unistrut and two square 'U' bolts each attached to cranked rectangular clamp plates. Any flange width or thickness from a rolled steel or Aluminium joist beam can be accommodated. The suspension is achieved using a TRA 18 or ERL18 Studding Set. Safe Working Load data for this product is available on request.

HAND TRACDRIVE FLOOR MOUNTED

HAND TRACDRIVE FLOOR MOUNTED

HTDF Is a floor mounted compact hand winch to operate corded tracks where hand pulling is not suitable. It can be retro fitted to any system. The winch is roped up in a similar way to our motors.

HAND TRACDRIVE WALL MOUNTED

HAND TRACDRIVE WALL MOUNTED

HTDW The hand TracDrive is a compact hand winch to operate corded tracks where hand pulling is not suitable. It can be retro fitted to any system. The winch is roped up in a similar way to our motors. 

HARDWARE KIT FOR TRA06

HARDWARE KIT FOR TRA06

A kit of wheels and fixings for one complete TRA06 runner.

HARDWARE KIT FOR TRA28AHD

HARDWARE KIT FOR TRA28AHD

A kit of wheels and fixings for one complete TRA28AHD Scenery Carrier.

INCREMENTAL SWIVEL ARM WITH BRAKE c/w TRA28AHD SCENERY CARRIER

INCREMENTAL SWIVEL ARM WITH BRAKE c/w TRA28AHD SCENERY CARRIER

Incremental swivel arm with brake complete with TRA28AHD scenery carrier.

LONG REACH WALL BRACKET (400 mm)

LONG REACH WALL BRACKET (400 mm)

TRA16HD Wall Bracket is used to attach a track to a wall or vertical surface.  The side arms are spaced 13mm apart to allow studding or threaded rod to attach into the top channel for any of our track systems. This component has a reach of 400mm.

M12 STUDDING (M12 x 150 mm c/w NUTS & WASHERS)

M12 STUDDING (M12 x 150 mm c/w NUTS & WASHERS)

TRA18 This is a 150mm x M12 threaded rod supplied with four nuts and washers. Longer lengths of studding are available on request. This component can be used with our TRA13 Girder Clamp and TRA16 Wall Bracket Set.

MOTOR DRIVE UNIT FOR UNITRACK/UNIBEAM/ERAIL

MOTOR DRIVE UNIT FOR UNITRACK/UNIBEAM/ERAIL

TDRIVE Motor drive unit is aplug and play track mounted motor system for all corded tracks incorporating control with open/close and stop functions with variable speed. 230V supply. Maximum curtain weight 300Kg straight track, 200Kg curved track. It is mainly used on Unitrack and Unibeam systems but can also be fitted to ERAIL,

REARFOLD TAG - BOLT ON ACCESSORY

REARFOLD TAG - BOLT ON ACCESSORY

TRA08 The rearfold tag can be added to either a TRA06 two wheeled or a TRA06C four wheeled runner. It is attached with four push in plugs supplied with the tag. This accessory causes the curtain or cloth to open  flat, this means an image or a pattern remains visible as it travels. Rearfold only works on straight track systems.

SCENERY CARRIER BOTTOM

SCENERY CARRIER BOTTOM

TRA28B This component can be fitted to TRA 28A,TRA 28AHD and UBM28A to carry scenic items. It accommodates pieces of varying thickness from 6mm to 44mm. The central pickup allows the carrier to pivot and there is movement to allow the COG to be adjusted. Scenery can lie flat on stage and be raised into the vertical position for ease of rigging.

SCENERY CARRIER WITH BRAKE - HEAVY DUTY (WLL 125 kg)

SCENERY CARRIER WITH BRAKE - HEAVY DUTY (WLL 125 kg)

This heavy Duty Scenery Carrier has a robust 'U' shaped body. Stiffening webs at each end of the body provide more space to accommodate for four extra side wheels as the main top and bottom wheels are not flanged. The carrier is designed to carry heavy items on both straight and curved track systems and can be used in conjunction with the TRA28B scenery carrier bottom. All twelve ball race wheels are bolted to the bodywork of the carrier for extra strength. 

SCENERY CARRIER WITH HANGING LOOPS - HEAVY DUTY (WLL 125 kg)

SCENERY CARRIER WITH HANGING LOOPS - HEAVY DUTY (WLL 125 kg)

This heavy Duty Scenery Carrier has a robust 'U' shaped body. Stiffening webs at each end of the body provide more space to accommodate for four extra side wheels as the main top and bottom wheels are not flanged. The carrier is designed to carry heavy items on both straight and curved track systems and can be used in conjunction with the TRA28B scenery carrier bottom. All twelve ball race wheels are bolted to the bodywork of the carrier for extra strength.

UNITRACK SIDE CORD ROPE CLAMP FOR TRA07 AND TRA28A

UNITRACK SIDE CORD ROPE CLAMP FOR TRA07 AND TRA28A

TRA35 Side cord rope clamp. This rope clamp is fitted to TRA07 or TRA28 carrier bodies on straight Unitrack and Unibeam side cord systems. Refer to our cording diagrams for mounting and use details.

UNITRACK SIDE CORD ROPE CLAMP FOR TRA28AHD

UNITRACK SIDE CORD ROPE CLAMP FOR TRA28AHD

TRA35HD Rope clamp functions the same as TRA35 but fits the TRA28AHD scenery carrier for side cording. Refer to our cording diagrams for mounting and use details.

SWIVEL ARM

SWIVEL ARM

Swivel arm

SWIVEL ARM WITH BRAKE c/w TRA28AHD SCENERY CARRIER

SWIVEL ARM WITH BRAKE c/w TRA28AHD SCENERY CARRIER

Swivel arm with brake complete with TRA28AHD scenery carrier.

TRA28HDARM - SCENERY CARRIER ARM HEAVY DUTY CURVED TRACK CORD ARM FOR TRA28AHD AND UBM28A SCENERY CARRIERS

TRA28HDARM - SCENERY CARRIER ARM HEAVY DUTY CURVED TRACK CORD ARM FOR TRA28AHD AND UBM28A SCENERY CARRIERS

TRA28HDARM This component can be fitted to a TRA 28AHD Heavy Duty Scenery Carrier for cording  on a curved track. The arm fits  on either the side of the carrier body. The arm guides the operating cord through TRA19 and UBM19 capstan pulleys. 

TRACDRIVE FOR UNITRACK, CONTROL NOT INCLUDED

TRACDRIVE FOR UNITRACK, CONTROL NOT INCLUDED

TRADU1 and B1 Track mounted motor system 0.4kW, 50 Hz without control.  The TRACDRIVE mounts directly beneath the track but can also be wall mounted with additional brackets TD1002F. It can drive straight or curved systems and will operate curtains weighing up to 300kg. The motor uses TRA27 cord. It is supplied with track mounted limit switches. The motor can be wired in either Star 415 volts ac or Delta 240 volts ac.  The junction box which will accept all relevant motor connections. Termination to the junction box is through hard wired cable glands.

UNITRACK / UNIBEAM 2 WHEELED RUNNER

UNITRACK / UNIBEAM 2 WHEELED RUNNER

TRA06 twin wheeled carrier for use on straight Unitrack and Unibeam tracks to attach curtain and soft goods. Standard spacing is 300mm (1 foot) centres and the safe working load is 25Kg. The carrier has flanged ball raced polyurethane tyred wheels, a swivelling loop for curtain attachment and the body is moulded from MRP (metal replacement polymer) rubber strips form noise resistant buffers.  Four holes in the base  enable the TRA08 rearfold tag to be fitted. A flat 'keeper' bar also allows runners to be added or removed from any point on Unitrack. The width of the carrier is 40mm.

UNITRACK / UNIBEAM 4 WHEELED RUNNER

UNITRACK / UNIBEAM 4 WHEELED RUNNER

TRA06C The four wheeled carrier is used on curved Unitrack and Unibeam tracks to attach curtains and soft goods. Standard spacing is at 300mm (1 foot) centres and the safe working load is 25Kg. The carrier has four flanged ball raced polyurethane tyred wheels, a swivelling loop for curtain attachment and the body is moulded from MRP (metal replacement polymer) rubber strips form noise resistant buffers.  Four holes in the base  enable the TRA08 rearfold tag to be fitted.  The 4 wheeled carrier can only be aded and removed from track ends.

UNITRACK / UNIBEAM CENTRAL ROPE CROSSOVER FOR REARFOLD CURTAINS TO CENTRE BUTT

UNITRACK / UNIBEAM CENTRAL ROPE CROSSOVER FOR REARFOLD CURTAINS TO CENTRE BUTT

The TRA29 is located in the centre of straight tracks using rearfold carriers. It allows the operating cord to crossover at the centre. Please see cording diagram 19 to see its application.

UNITRACK / UNIBEAM CURVE CORD GUIDE

UNITRACK / UNIBEAM CURVE CORD GUIDE

TRA19 is mounted on the top of Unitrack and Unibeam tracks and is a guide for the operating cord on curved tracks. spacing is at 500mm centres on curves and 2m on straight sections. M12 fixings are included for Unitrack and Unibeam.

UNITRACK / UNIBEAM CURVE HEAD PULLEY

UNITRACK / UNIBEAM CURVE HEAD PULLEY

TRA21 is a curved track head pulley for Unitrack and Unibeam, it can divert the operating cords either up or down for motors, floor pulleys and winches. The Pulley projects 94mm (3 1/2") beyond the end of the track and is 224mm ((9") in length.

UNITRACK / UNIBEAM CURVE MASTER RUNNER

UNITRACK / UNIBEAM CURVE MASTER RUNNER

TRA 20 Curve master runner carries a TRA28ARM for corded curved Unitrack and Unibeam systems. The arm clamps the operating cord and guides it through the TRA19  cord guides. The carrier has a Safe Working Load of 50Kg and is used with manual and motorised systems.

UNITRACK / UNIBEAM CURVE RETURN PULLEY

UNITRACK / UNIBEAM CURVE RETURN PULLEY

TRA22 The curve return pulley diverts the operating cord above the track back towards the head pulley on curved Unitrack and Unibeam. The overall length of the component is 200mm (8")

UNITRACK / UNIBEAM CURVE SUSPENSION BRACKET

UNITRACK / UNIBEAM CURVE SUSPENSION BRACKET

TRA23 Curve Suspension Bracket is required for corded curved Unitrack and Unibeam systems it works with  other suspension fittings,  TRA13, TRA14, TRA15, TRA16, and TRA18. The top holes work as an offset plate on overlapping curved tracks. It works as a spacer for the operating cord, refer to the cording diagrams for more detail.

UNITRACK / UNIBEAM END STOP

UNITRACK / UNIBEAM END STOP

TRA24 This endstop is used to anchor the trailing edge of curtains on Unitrack and Unibeam tracks.

UNITRACK / UNIBEAM FLAT END STOP FOR SCENERY

UNITRACK / UNIBEAM FLAT END STOP FOR SCENERY

TRA24S The Flat Endstop is used on Unitrack and Unibeam tracks when they are used for scenery, The rubber sleeves work with all scenery carriers to provide silent buffers.

UNITRACK / UNIBEAM HEAD PULLEY

UNITRACK / UNIBEAM HEAD PULLEY

TRA09 The Head Pulley is used on a straight Unitrack and Unibeam systems to divert the cord down to a floor pulley or motor.  The TRA09  pulley sheaves are set at 80mm centres and is used at the opposite track end to the TRA10 Head Pulley.

UNITRACK / UNIBEAM HEAVY DUTY CURVE MASTER RUNNER

UNITRACK / UNIBEAM HEAVY DUTY CURVE MASTER RUNNER

TRA20HD The HD curve master runner uses the TRA28AHD body with a TRA28HD arm to  clamp the operating cord on curved Unitrack and Unibeam systems a plate beneath the body carries 2 curtain attachment loops. The arm guides the cord through TRA19 guides. It is for longer curved systems and heavier curtains and has a Safe Working Load of 100Kg.

UNITRACK / UNIBEAM HEAVY DUTY SCENERY CARRIER (125 kg WLL)

UNITRACK / UNIBEAM HEAVY DUTY SCENERY CARRIER (125 kg WLL)

TRA28AHD Heavy Duty Scenery Carrier has 12 ball raced unflanged wheels in a robust body. The carrier is designed to carry heavy items on both straight and curved track Unitrack and Unibeam systems and can be used in conjunction with the TRA28B scenery carrier bottom.The carrier has a safe working load of 100Kg.

UNITRACK / UNIBEAM HOOK CLAMP FOR 48-51 mm TUBE/TRUSS

UNITRACK / UNIBEAM HOOK CLAMP FOR 48-51 mm TUBE/TRUSS

TRA14 The Hook Clamp is used for attaching Unitrack and Unibeam to tube or truss ranging in diameters from 48mm to 51mm. This clamp has a safe working load of 200kg.

UNITRACK / UNIBEAM LINE PICKUP

UNITRACK / UNIBEAM LINE PICKUP

TRA25 Is used on straight Unitrack and Unibeam centre overlap tracks it is located on the return side of the operating cord to prevent the slack line drooping into vision. It is recommended that this fitting is used at 2.5m centres.

UNITRACK / UNIBEAM MASTER RUNNER

UNITRACK / UNIBEAM MASTER RUNNER

TRA07 Master Runner is used on Unitrack and Unibeam systems for the leading edge of curtains and it clamps the operating cord on manual and motorised systems.  The Master Runner has a safe working load of 50Kg. Two metal loops are placed 55mm apart for attaching the leading edge of curtains. 

UNITRACK / UNIBEAM OFFSET PLATE

UNITRACK / UNIBEAM OFFSET PLATE

TRA17 This part is used with TRA14 hook clamps on Unitrack and Unibeam systems when an overlap track is suspended from a single pipe or tube. This plate ensures that the track hangs centrally under the tube. Refer to cording diagrams for mounting detail.

UNITRACK / UNIBEAM OVERLAP ARM

UNITRACK / UNIBEAM OVERLAP ARM

TRA07A Overlap Arms are used in pairs and are fitted to the sides of TRA07 master runners.  These arms create a curtain overlap on a single track.  The curtain attaches to the holes in the plate and make  an overlap of 50cm. The overall length of the arm is 400mm (15 3/4").

UNITRACK / UNIBEAM OVERLAP CLIP

UNITRACK / UNIBEAM OVERLAP CLIP

TRA26 This part is always used in pairs on both Unitrack and Unibeam straight and curved tracks to create 80mm track centres  where they overlap. Refer to cording diagrams for mounting detail.

UNITRACK / UNIBEAM REARFOLD RUNNER

UNITRACK / UNIBEAM REARFOLD RUNNER

TRA06R The rearfold carrier is a TRA06 twin wheeled carrier fitted with a TRA08 accessory and comes pre assembled. It for straight Unitrack and Unibeam tracks. The rearfold tag causes the curtain or cloth to travel flat as it moves offstage. An image or a pattern can  remain visible as it disappears offstage (refer to our cording diagrams for information on cording this effect). The rearfold only works on straight track systems. Spacing is usually at 300mm (1 foot) centres along the curtain. The safe working load is 25Kg. The width of the carrier is 40mm.

UNITRACK / UNIBEAM RETURN PULLEY

UNITRACK / UNIBEAM RETURN PULLEY

TRA10 Return Pulley is fitted at the opposite end on a straight track to the head pulley. It is used on Unitrack and Unibeam and diverts the cord back along the track to the head pulley TRA09.

UNITRACK / UNIBEAM SCENERY CARRIER (50 kg WLL)

UNITRACK / UNIBEAM SCENERY CARRIER (50 kg WLL)

TRA28A Scenery carrier for Unitrack and Unibeam, it is similar to the TRA07 Master Runner but has a central 13mm hole in the base to accept an M12 fitting. This carrier is mainly used in conjunction with the Scenery carrier bottom TRA28B. The carrier has a Safe Working Load of 50Kg

UNITRACK / UNIBEAM SIDE CORD CENTRE OVERLAP DIVERTER FOR CENTRE BUTTING EFFECTS

UNITRACK / UNIBEAM SIDE CORD CENTRE OVERLAP DIVERTER FOR CENTRE BUTTING EFFECTS

TRA33 Consist of a pair of TRA32 guides and are placed in the centre of side corded Unitrack and Unibeam tracks to allowr curtains or scenery to meet or butt in the centre. See the side cording diagram 12 for a detailed description of how to rope this component.

UNITRACK / UNIBEAM SIDE CORD CENTRE OVERLAP DIVERTER FOR CENTRE BUTTING EFFECTS - HEAVY DUTY

UNITRACK / UNIBEAM SIDE CORD CENTRE OVERLAP DIVERTER FOR CENTRE BUTTING EFFECTS - HEAVY DUTY

TRA33HD Identical to the TRA33 but wider to accommodate for the larger body of a TRA28AHD scenery carrier.

UNITRACK / UNIBEAM SIDE CORD CORD GUIDE

UNITRACK / UNIBEAM SIDE CORD CORD GUIDE

TRA32 Side Cord guide for Unitrack and Unibeam it provides support for the operating cord on side corded systems to prevent cord sag over long distances. See cording diagrams for mounting and use details.

UNITRACK / UNIBEAM SIDE CORD CORD GUIDE - HEAVY DUTY

UNITRACK / UNIBEAM SIDE CORD CORD GUIDE - HEAVY DUTY

TRA32HD is identical to a standard TRA32 but wider to accommodate the larger body of a TRA28AHD scenery carrier

UNITRACK / UNIBEAM SIDE CORD HEAD & RETURN PULLEY SET (3 PART) - HEAVY DUTY

UNITRACK / UNIBEAM SIDE CORD HEAD & RETURN PULLEY SET (3 PART) - HEAVY DUTY

TRA34HD Identical to the TRA34 but wider to accommodate for the larger body of the TRA28AHD scenery carrier.

UNITRACK / UNIBEAM SIDE CORD HEAD & RETURN PULLEY SET (3 PART)

UNITRACK / UNIBEAM SIDE CORD HEAD & RETURN PULLEY SET (3 PART)

TRA34 Side cord system set of Head and Return pulleys for Unitrack and Unibeam. It is a set of three pulleys and is used to divert the cord to and from floor pulleys or motors. Refer to our cording diagrams for mounting and use details.

UNITRACK / UNIBEAM SINGLE TRACK HEAD PULLEY

UNITRACK / UNIBEAM SINGLE TRACK HEAD PULLEY

TRA31H Head pulley for Unitrack and Unibeam for straight single tracks to keep the cording  within the track width. See our cording diagrams for mounting and use detail.

UNITRACK / UNIBEAM SINGLE TRACK HEAD PULLEY - HEAVY DUTY

UNITRACK / UNIBEAM SINGLE TRACK HEAD PULLEY - HEAVY DUTY

TRA31HHD This Head pulley is a Heavy duty version of the the standard TRA31H for use on a single Unitrack and Unibeam systems. 

UNITRACK / UNIBEAM SINGLE TRACK RETURN PULLEY

UNITRACK / UNIBEAM SINGLE TRACK RETURN PULLEY

TRA31R This return pulley is used on Unitrack and Unibeam single tracks, it is posited at the opposite track end to the TRA31H head pulley and diverts the operating cord back to it. Refer to our cording diagrams for mointing and use details.

UNITRACK 0.25 m STANDARD TRACK

UNITRACK 0.25 m STANDARD TRACK

TRA01 250mm long (10") UNITRACK section. UNITRACK sections are joined together with TRA05 joint sets.

UNITRACK 0.5 m STANDARD TRACK

UNITRACK 0.5 m STANDARD TRACK

TRA02 500 MM long (1'8") UNITRACK section. UNITRACK sections are joined together with TRA05 joint sets.

UNITRACK 1 m STANDARD TRACK

UNITRACK 1 m STANDARD TRACK

TRA03 1M long (3'3") UNITRACK section. UNITRACK sections are joined together with TRA05 joint sets.

UNITRACK 1000 mm X 90 DEG. CURVED SECTION

UNITRACK 1000 mm X 90 DEG. CURVED SECTION

TRC1090 Standard curved Unitrack section, 1m radius x 90 degrees.

UNITRACK 1500 mm X 90 DEG. CURVED SECTION

UNITRACK 1500 mm X 90 DEG. CURVED SECTION

TRC1590 Standard curved Unitrack section, 1.5m radius x 90 degrees.

UNITRACK 2 m STANDARD TRACK

UNITRACK 2 m STANDARD TRACK

TRA04 2M long (6'6") UNITRACK section. UNITRACK sections are joined together with TRA05 joint sets.

UNITRACK 2000 mm X 90 DEG. CURVED SECTION

UNITRACK 2000 mm X 90 DEG. CURVED SECTION

TRC2090 Standard curved Unitrack section, 2m radius x 90 degrees.

UNITRACK 3000 mm X 90 DEG. CURVED SECTION (Supplied In 2 Pieces)

UNITRACK 3000 mm X 90 DEG. CURVED SECTION (Supplied In 2 Pieces)

TRC3090 Standard curved Unitrack section, 2m radius x 90 degrees. This curve is made in two 45 degree sections and includes a TRA05 joint set.

UNITRACK DEADLINE FIXING

UNITRACK DEADLINE FIXING

TRA15 is used to suspend track sections by rope cordage or wire rope. It comprises of a forged fitting and threaded M12 bush with a solid tubular loop springing from the top outer edges of the bush. It has a test rating of 150Kg Safe Working Load.

UNITRACK JOINT SET

UNITRACK JOINT SET

TRA05 Joint set used to connect two Unitrack sections (straight or curved) and comprises of one M8 bolt joint set and four square steel spigots. The spigots are a close sliding fit into the track section tubes and ensure that correct alignment is maintained.

UNITRACK/UNIBEAM MOTOR MOUNT FOR CURVED TRACK

UNITRACK/UNIBEAM MOTOR MOUNT FOR CURVED TRACK

TDRMAS06 This mounting plate is used with TDRIVE and TRACDRIVE motor units when curved track cording is required. The motor unit is rotated by 180 degrees so that the traction pulleys line up with the operating cord traveling from the TRA21 curved track head pulleys.

WALL BRACKET

WALL BRACKET

TRA16 Wall Bracket is used to attach a track to a wall or vertical surface.  The side arms are spaced 13mm apart to allow studding or threaded rod to attach into the top channel for any of our track systems. This component has been tested to a 100Kg Safe Working Load at a reach of 200mm.

Support

Need some support?

View our downloads here