Please complete the form below to generate a quote for your system. * = mandatory fields.
8 mm BLACK POLYESTER CORD PER METRE
TRA2701 Cord / Handline, 8 Plait, 8 mm diameter prestretched matt black polyester cord used to operate all Triple E track systems, manual and motorised. Triple E rope has a red fleck in it and is the only rope we guarantee to work with our systems and rearfold components.
ADJUSTABLE FLOOR PULLEY
TRA1102 is a floor mounted return pulley designed for use on fixed position track systems. It is intended to be screwed to the floor where the cord is tensioned by adjusting the height of the pulley with thumb screws. The overall dimensions of the Adjustable Floor Pulley are 300 m high x 90 mm wide x 75 mm at base.
FOOT STIRRUP
TRA1101 Foot stirrup is a floor level mounted pulley designed for use on a flown or movable corded track system. The stirrup at the base allows the rope to be tensioned either by placing a foot into it or hanging a weight from it. The overall dimensions of the Pulley are 300 mm high x 150 mm wide at the base with a 25 mm wide strap.
GIRDER CLAMP
TRA1301 This girder clamp provides a suspension point from the flanges of an 'I' beam. It comprises of a length of Unistrut and two square 'U' bolts each attached to cranked rectangular clamp plates. Any flange width or thickness from a rolled steel or Aluminium joist beam can be accommodated. The suspension is achieved using a TRA1801 or ERL1801 Studding Set.
HAND TRACDRIVE FLOOR MOUNTED
HTDF Is a floor mounted compact hand winch to operate corded tracks where hand pulling is not suitable. It can be retro fitted to any system. The winch is roped up in a similar way to our motors.
HAND TRACDRIVE WALL MOUNTED
HTDW The hand TracDrive is a compact hand winch to operate corded tracks where hand pulling is not suitable. It can be retro fitted to any system. The winch is roped up in a similar way to our motors.
LONG REACH WALL BRACKET (400 mm)
TRA1602 Wall Bracket is used to attach a track to a wall or vertical surface. The side arms are spaced 13 mm apart to allow studding or threaded rod to attach into the top channel for any of our track systems. This component has a reach of 500 mm.
UNITRACK / UNIBEAM SIDE CORD ROPE CLAMP FOR TRA0701 AND TRA2801
TRA8006 Side cord rope clamp. This rope clamp is fitted to TRA0701 or TRA2801 carrier bodies on straight UniTrack and UniBeam side cord systems. Refer to our cording diagrams for mounting and use details.