Please complete the form below to generate a quote for your system. * = mandatory fields.

Straight with Overlap Arms

Next day delivery options are for the UK only. If you are not in the UK or want some other delivery options please call us to discuss details, and select "Collection" below to remove delivery costs from your quote.

By 17:30 hrs
By 12:00 hrs
By 10:30 hrs
By 09:00 hrs
Collection

In order to get this quote to you and be able to discuss it if necessary, we need to know a little about you. Please complete the fields below so that we can progress the quote.

8 mm BLACK POLYESTER CORD PER METRE

TRA2701 Cord / Handline, 8 Plait, 8 mm diameter prestretched matt black polyester cord used to operate all Triple E track systems, manual and motorised. Triple E rope has a red fleck in it and is the only rope we guarantee to work with our systems and rearfold components.

ADJUSTABLE FLOOR PULLEY

TRA1102 is a floor mounted return pulley designed for use on fixed position track systems. It is intended to be screwed to the floor where the cord is tensioned by adjusting the height of the pulley with thumb screws. The overall dimensions of the Adjustable Floor Pulley are 300 m high x 90 mm wide x 75 mm at base.

FOOT STIRRUP

TRA1101 Foot stirrup is a floor level mounted pulley designed for use on a flown or movable corded track system. The stirrup at the base allows the rope to be tensioned either by placing a foot into it or hanging a weight from it. The overall dimensions of the Pulley are 300 mm high x 150 mm wide at the base with a 25 mm wide strap.

GIRDER CLAMP

TRA1301 This girder clamp provides a suspension point from the flanges of an 'I' beam. It comprises of a length of Unistrut and two square 'U' bolts each attached to cranked rectangular clamp plates. Any flange width or thickness from a rolled steel or Aluminium joist beam can be accommodated. The suspension is achieved using a TRA1801 or ERL1801 Studding Set. 

HAND TRACDRIVE FLOOR MOUNTED

HTDF Is a floor mounted compact hand winch to operate corded tracks where hand pulling is not suitable. It can be retro fitted to any system. The winch is roped up in a similar way to our motors.

HAND TRACDRIVE WALL MOUNTED

HTDW The hand TracDrive is a compact hand winch to operate corded tracks where hand pulling is not suitable. It can be retro fitted to any system. The winch is roped up in a similar way to our motors. 

LONG REACH WALL BRACKET (400 mm)

TRA1602 Wall Bracket is used to attach a track to a wall or vertical surface. The side arms are spaced 13 mm apart to allow studding or threaded rod to attach into the top channel for any of our track systems. This component has a reach of 500 mm.

TDRIVE - 240 V - WLL 300 kg STRAIGHT / 200 kg CURVED

TDrive Motor drive unit is a plug and play track mounted motor system for all corded tracks incorporating control with open/close and stop functions with variable speed. 230 V supply. Maximum curtain weight 300 kg straight track, 200 kg curved track. It is mainly used on UniTrack and UniBeam systems but can also be fitted to Erail.