Please complete the form below to generate a quote for your system. * = mandatory fields.
TRA1301 This girder clamp provides a suspension point from the flanges of an 'I' beam. It comprises of a length of Unistrut and two square 'U' bolts each attached to cranked rectangular clamp plates. Any flange width or thickness from a rolled steel or Aluminium joist beam can be accommodated. The suspension is achieved using a TRA1801 or ERL1801 Studding Set.
LONG REACH WALL BRACKET (400 mm)
TRA1602 Wall Bracket is used to attach a track to a wall or vertical surface. The side arms are spaced 13 mm apart to allow studding or threaded rod to attach into the top channel for any of our track systems. This component has a reach of 500 mm.
M12 STUDDING (M12 x 150 mm c/w NUTS & WASHERS)
TRA1801 This is a 150 mm x M12 threaded rod supplied with four nuts and washers. Longer lengths of studding are available on request. This component can be used with our TRA1301 Girder Clamp and TRA16 Wall Bracket Set.
UNITRACK / UNIBEAM 4 WHEELED RUNNER
TRA0602 The four wheeled carrier is used on curved UniTrack and UniBeam tracks to attach curtains and soft goods. Standard spacing is at 300 mm (1 foot) centres and the safe working load is 25 kg. The carrier has four flanged ball raced polyurethane tyred wheels, a swivelling loop for curtain attachment and the body is moulded from MRP (metal replacement polymer) rubber strips form noise resistant buffers. Four holes in the base enable the TRA8009 rearfold tag to be fitted. The 4 wheeled carrier can only be added and removed from track ends.
UNITRACK / UNIBEAM END STOP
TRA2401 This end stop is used to anchor the trailing edge of curtains on UniTrack and UniBeam tracks.
UNITRACK / UNIBEAM HOOK CLAMP FOR 48-51 mm TUBE/TRUSS
TRA1401 The Hook Clamp is used for attaching UniTrack and UniBeam to tube or truss ranging in diameters from 48 mm to 51 mm. This clamp has a safe working load of 200 kg.
UNITRACK / UNIBEAM MASTER RUNNER
TRA0701 Master Runner is used on UniTrack and UniBeam systems for the leading edge of curtains and it clamps the operating cord on manual and motorised systems. The Master Runner has a safe working load of 50 kg. Two metal loops are placed 55 mm apart for attaching the leading edge of curtains.
UNITRACK 0.25 m STANDARD TRACK
TRA0101 0.25 m long (10") UniTrack section. UniTrack sections are joined together with TRA0501 joint sets.