Erail Walkalong - Straight with Centre Overlap

ERL1701 This mounting bracket is used to attach track sections either directly to a soffit or ceiling or from the central hole to suspension fittings such as the ERL1401, TRA1601 and TRA1801.

ERL0601 Erail carrier is constructed from a Steel 'U' bracket to which two rubber buffers are fitted. Ball raced wheels ensure a silent operation and the curtains can be attached using a swivel hook located in the base of the runner. Each runner has a SWL of 15 kg.

ERL0108 This pre-assembled 3 m (10 feet) long offset centre overlap assembly can be used with both a straight, curved and 'U' shaped track system where overlapping sections are required. It also comes supplied with a pair of ERL2601 overlap clips to ensure correct alignment. Other lengths can be supplied as required.

ERL0701 Erail Master Carrier is constructed from a 'U' shaped steel body which houses 4 ball raced wheels. This carrier is used for straight and curved walkalong systems. ERL8001 overlap arms can be attached.

ERL1501 - Deadline fixing for Erail and 2Way.

ERL2401 End Stop is designed to be mounted anywhere along the Erail track extrusion. It provides an anchorage point via a 12 mm diameter hole for the trailing edge of curtains when placed at the ends of the track.

ERL0501 Erail joint sets consist of two plates. One fits inside the channel and the second goes on top secured with M6 csk screws. The roll pin is inserted into the keyhole slot in the base of the track to align the running surfaces.

ERL0101 Erail is a black anodised 'I' form Aluminium track. The Erail extrusion is stocked in 6.1 m (20 feet) lengths but can be supplied in cut lengths as required. The maximum permissible length for UK shipping is 3.05 m (10 feet).