A track with two 90 degree curves to create a U shape, for two curtains which overlap using overlap arms and are walked along the track.
Please complete the form below to generate a quote for your system. * = mandatory fields.
The 14 products listed below may be used in the U-Shape with Overlap Arms system.
TRA13 This girder clamp provides a suspension point from the flanges of an 'I' beam. It comprises of a length of Unistrut and two square 'U' bolts each attached to cranked rectangular clamp plates. Any flange width or thickness from a rolled steel or Aluminium joist beam can be accommodated. The suspension is achieved using a TRA18 or ERL18 Studding Set. Safe Working Load data for this product is available on request.
TRA16HD Wall Bracket is used to attach a track to a wall or vertical surface. The side arms are spaced 13 mm apart to allow studding or threaded rod to attach into the top channel for any of our track systems. This component has a reach of 400 mm.
Standard curved UniBeam track section, 2 m (6'6") radius x 90 degrees.
Curved UniBeam track lengths can be rolled to any required radius (min 2 m (6'6")) and to a maximum length of 5.5 m (18').
Deadline fixing for UniBeam.
The UBM05 bright zinc plated joint set is used to connect two adjoining sections of track together. It comprises of two clamp plates designed to have a close fit inside the width of the channel groves. Four 10 mm set screws (located in each plate) lock the two separate track sections together.
The UBM01 UniBeam track is an aluminium alloy extrusion, 100 mm deep x 50 mm wide. Lipped grooves located in the top and bottom of the track are joined by a thin vertical web and are designed to accept standard Unistrut channel nuts. These track section are available in lengths of up to 6.1 m (20 feet). The UBM01 UniBeam track system has the same external dimensions as UniTrack. The running gear components are therefore also compatible with both systems.
150 mm x M12 studding is supplied with four nuts and washers including a Unistrut nut. Longer lengths of studding are available on request and can be used with our TRA13 Girder Clamp and TRA16 Wall Bracket Set.
TRA06C The four wheeled carrier is used on curved UniTrack and UniBeam tracks to attach curtains and soft goods. Standard spacing is at 300 mm (1 foot) centres and the safe working load is 25 kg. The carrier has four flanged ball raced polyurethane tyred wheels, a swivelling loop for curtain attachment and the body is moulded from MRP (metal replacement polymer) rubber strips form noise resistant buffers. Four holes in the base enable the TRA08 rearfold tag to be fitted. The 4 wheeled carrier can only be added and removed from track ends.
TRA24 This end stop is used to anchor the trailing edge of curtains on UniTrack and UniBeam tracks.
TRA14 The Hook Clamp is used for attaching UniTrack and UniBeam to tube or truss ranging in diameters from 48 mm to 51 mm. This clamp has a safe working load of 200 kg.
TRA07 Master Runner is used on UniTrack and UniBeam systems for the leading edge of curtains and it clamps the operating cord on manual and motorised systems. The Master Runner has a safe working load of 50 kg. Two metal loops are placed 55 mm apart for attaching the leading edge of curtains.
TRA07A Overlap Arms are used in pairs and are fitted to the sides of TRA07 master runners. These arms create a curtain overlap on a single track. The curtain attaches to the holes in the plate and make an overlap of 50 cm. The overall length of the arm is 400 mm (15 3/4").
TRA16 Wall Bracket is used to attach a track to a wall or vertical surface. It is mild steel powder coated black. It screws or bolts to the wall with 10 mm fixings. The wall bracket is 265 mm long, 180 mm high and 35 mm wide.
This L-shaped bracket consists of a flat steel plate and two laser profiled sidearms. These sidearms are spaced 13mm apart to allow studding or threaded rod to attach into the top channel for any of our track systems. This component has been tested to a 100Kg safe working load at a reach of 200mm.