Tel: +44 (0) 1959 570 333 Email: info@triplee.ltd

UniTrack Corded - Straight Rearfold Wipe

Account Sign In

For a personalised, fully detailed quote, please sign in to your account before filling a quote form.

If you do not have an account, please email info@triplee.ltd

A straight track for one curtain where the curtain is pulled along the track with rope, either by hand or motorised. The runners are fitted with a rearfold tag making the curtain gather off-stage as it is opened, instead of gathering behind the master runner.

Please complete the form below to generate a quote for your system. All fields are mandatory.

Straight Rearfold Wipe
Straight Rearfold Wipe

Please complete the form below to generate a quote for your system. All fields are mandatory.

Next day delivery options are for the UK only. If you are not in the UK or want some other delivery options please call us to discuss details, and select "Collection" below to remove delivery costs from your quote.

By 17:30 hrs
By 12:00 hrs
By 10:30 hrs
By 09:00 hrs
Collection

In order to get this quote to you and be able to discuss it if necessary, we need to know a little about you. Please complete the fields below so that we can progress the quote.

Product list for UniTrack Corded - Straight Rearfold Wipe

The 27 products listed below may be used in the Straight Rearfold Wipe system.

8 mm BLACK POLYESTER CORD PER METRE

8 mm BLACK POLYESTER CORD PER METRE

TRA27 Cord / Handline, 8 Plait, 8 mm diameter prestretched matt black polyester cord used to operate all Triple E track systems, manual and motorised. Triple E rope has a red fleck in it and is the only rope we guarantee to work with our systems and rearfold components.

ADJUSTABLE FLOOR PULLEY

ADJUSTABLE FLOOR PULLEY

TRA12 is a floor mounted return pulley designed for use on fixed position track systems. It is intended to be screwed to the floor where the cord is tensioned by adjusting the height of the pulley with thumb screws. The overall dimensions of the Adjustable Floor Pulley are 300 m high x 90 mm wide x 75 mm at base.

FOOT STIRRUP

FOOT STIRRUP

TRA11 Foot stirrup is a floor level mounted pulley designed for use on a flown or movable corded track system. The stirrup at the base allows the rope to be tensioned either by placing a foot into it or hanging a weight from it. The overall dimensions of the Pulley are 300 mm high x 150 mm wide at the base with a 25 mm wide strap.

GIRDER CLAMP

GIRDER CLAMP

TRA13 This girder clamp provides a suspension point from the flanges of an 'I' beam. It comprises of a length of Unistrut and two square 'U' bolts each attached to cranked rectangular clamp plates. Any flange width or thickness from a rolled steel or Aluminium joist beam can be accommodated. The suspension is achieved using a TRA18 or ERL18 Studding Set. Safe Working Load data for this product is available on request.

HAND TRACDRIVE FLOOR MOUNTED

HAND TRACDRIVE FLOOR MOUNTED

HTDF Is a floor mounted compact hand winch to operate corded tracks where hand pulling is not suitable. It can be retro fitted to any system. The winch is roped up in a similar way to our motors.

HAND TRACDRIVE WALL MOUNTED

HAND TRACDRIVE WALL MOUNTED

HTDW The hand TracDrive is a compact hand winch to operate corded tracks where hand pulling is not suitable. It can be retro fitted to any system. The winch is roped up in a similar way to our motors. 

HD MOTOR DRIVE UNIT FOR UNITRACK/UNIBEAM

HD MOTOR DRIVE UNIT FOR UNITRACK/UNIBEAM

Motor drive unit for all corded systems incorporating control with open/close and stop functions. Variable speed. 230 V supply. Maximum curtain weight 400 kg straight track, 300 kg curved track.

LONG REACH WALL BRACKET (400 mm)

LONG REACH WALL BRACKET (400 mm)

TRA16HD Wall Bracket is used to attach a track to a wall or vertical surface. The side arms are spaced 13 mm apart to allow studding or threaded rod to attach into the top channel for any of our track systems. This component has a reach of 400 mm.

M12 STUDDING (M12 x 150 mm c/w NUTS & WASHERS)

M12 STUDDING (M12 x 150 mm c/w NUTS & WASHERS)

TRA18 This is a 150 mm x M12 threaded rod supplied with four nuts and washers. Longer lengths of studding are available on request. This component can be used with our TRA13 Girder Clamp and TRA16 Wall Bracket Set.

MOTOR DRIVE UNIT FOR UNITRACK/UNIBEAM/ERAIL

MOTOR DRIVE UNIT FOR UNITRACK/UNIBEAM/ERAIL

TDrive Motor drive unit is a plug and play track mounted motor system for all corded tracks incorporating control with open/close and stop functions with variable speed. 230 V supply. Maximum curtain weight 300 kg straight track, 200 kg curved track. It is mainly used on UniTrack and UniBeam systems but can also be fitted to Erail.

TRACDRIVE FOR UNITRACK, CONTROL NOT INCLUDED

TRACDRIVE FOR UNITRACK, CONTROL NOT INCLUDED

TRADU1 and B1 Track mounted motor system 0.4 kW, 50 Hz without control. The TracDrive mounts directly beneath the track but can also be wall mounted with additional brackets TD1002F. It can drive straight or curved systems and will operate curtains weighing up to 300 kg. The motor uses TRA27 cord. It is supplied with track mounted limit switches. The motor can be wired in either Star 415 volts ac or Delta 240 volts ac. The junction box which will accept all relevant motor connections. Termination to the junction box is through hard wired cable glands.

UNITRACK / UNIBEAM END STOP

UNITRACK / UNIBEAM END STOP

TRA24 This endstop is used to anchor the trailing edge of curtains on UniTrack and UniBeam tracks.

UNITRACK / UNIBEAM HEAD PULLEY

UNITRACK / UNIBEAM HEAD PULLEY

TRA09 The Head Pulley is used on a straight UniTrack and UniBeam systems to divert the cord down to a floor pulley or motor. The TRA09 pulley sheaves are set at 80 mm centres and is used at the opposite track end to the TRA10 Head Pulley.

UNITRACK / UNIBEAM HOOK CLAMP FOR 48-51 mm TUBE/TRUSS

UNITRACK / UNIBEAM HOOK CLAMP FOR 48-51 mm TUBE/TRUSS

TRA14 The Hook Clamp is used for attaching UniTrack and UniBeam to tube or truss ranging in diameters from 48 mm to 51 mm. This clamp has a safe working load of 200 kg.

UNITRACK / UNIBEAM LINE PICKUP

UNITRACK / UNIBEAM LINE PICKUP

TRA25 Is used on straight UniTrack and UniBeam centre overlap tracks it is located on the return side of the operating cord to prevent the slack line drooping into vision. It is recommended that this fitting is used at 2.5 m centres.

UNITRACK / UNIBEAM MASTER RUNNER

UNITRACK / UNIBEAM MASTER RUNNER

TRA07 Master Runner is used on UniTrack and UniBeam systems for the leading edge of curtains and it clamps the operating cord on manual and motorised systems. The Master Runner has a safe working load of 50 kg. Two metal loops are placed 55 mm apart for attaching the leading edge of curtains. 

UNITRACK / UNIBEAM MASTER RUNNER WITH LIMIT STRIKER

UNITRACK / UNIBEAM MASTER RUNNER WITH LIMIT STRIKER

Master runner for UniTrack and UniBeam with a limit striker.

UNITRACK / UNIBEAM REARFOLD RUNNER

UNITRACK / UNIBEAM REARFOLD RUNNER

TRA06R The rearfold carrier is a TRA06 twin wheeled carrier fitted with a TRA08 accessory and comes pre assembled. It for straight UniTrack and UniBeam tracks. The rearfold tag causes the curtain or cloth to travel flat as it moves offstage. An image or a pattern can remain visible as it disappears offstage (refer to our cording diagrams for information on cording this effect). The rearfold only works on straight track systems. Spacing is usually at 300 mm (1 foot) centres along the curtain. The safe working load is 25 kg. The width of the carrier is 40 mm.

UNITRACK / UNIBEAM RETURN PULLEY

UNITRACK / UNIBEAM RETURN PULLEY

TRA10 Return Pulley is fitted at the opposite end on a straight track to the head pulley. It is used on UniTrack and UniBeam and diverts the cord back along the track to the head pulley TRA09.

UNITRACK 0.25 m STANDARD TRACK

UNITRACK 0.25 m STANDARD TRACK

TRA01 250 mm long (10") UniTrack section. UniTrack sections are joined together with TRA05 joint sets.

UNITRACK 0.5 m STANDARD TRACK

UNITRACK 0.5 m STANDARD TRACK

TRA02 500 mm long (1'8") UniTrack section. UniTrack sections are joined together with TRA05 joint sets.

UNITRACK 1 m STANDARD TRACK

UNITRACK 1 m STANDARD TRACK

TRA03 1 m long (3'3") UniTrack section. UniTrack sections are joined together with TRA05 joint sets.

UNITRACK 2 m STANDARD TRACK

UNITRACK 2 m STANDARD TRACK

TRA04 2 m long (6'6") UniTrack section. UniTrack sections are joined together with TRA05 joint sets.

UNITRACK DEADLINE FIXING

UNITRACK DEADLINE FIXING

TRA15 is used to suspend track sections by rope cordage or wire rope. It comprises of a forged fitting and threaded M12 bush with a solid tubular loop springing from the top outer edges of the bush. It has a test rating of 150 kg Safe Working Load.

UNITRACK JOINT SET

UNITRACK JOINT SET

TRA05 Joint set used to connect two UniTrack sections (straight or curved) and comprises of one M8 bolt joint set and four square steel spigots. The spigots are a close sliding fit into the track section tubes and ensure that correct alignment is maintained.

WALL BRACKET

WALL BRACKET

TRA16 Wall Bracket is used to attach a track to a wall or vertical surface. It is mild steel powder coated black. It screws or bolts to the wall with 10 mm fixings. The wall bracket is 265 mm long, 180 mm high and 35 mm wide.

This L-shaped bracket consists of a flat steel plate and two laser profiled sidearms. These sidearms are spaced 13mm apart to allow studding or threaded rod to attach into the top channel for any of our track systems. This component has been tested to a 100Kg safe working load at a reach of 200mm.

WIRELESS REMOTE CONTROL FOR ALL MOTORS

WIRELESS REMOTE CONTROL FOR ALL MOTORS

A complete set of components for SDrive and TDrive motors that enables wireless operation with open, close and stop functions. The sender unit requires a local single phase power supply.


Support

Need some support?

View our downloads here